Mazda 2012 CX-9, Owner'S Manual

Page: 18 / 584

Black plate (20,1)
NOTE
l
If the seat is already adjusted to the
position you are activating, the seat does
not move (a beep sound is not heard).
l
The advanced key/retractable key cannot be
programmed while the key is inserted in the
key cylinder.
l
If any of the following operations is
performed while activating a seat, the
activation will cancel (After pressing a
programming button or unlocking the doors
with a programmed advanced key/
retractable type key, and while the positions
are being adjusted).
l
The selector lever is shifted to a position
other than P (With the ignition switch in
the ON position).
l
Any of the seat adjustment switches
other than a lumbar support switch are
operated.
l
The set button is pressed.
l
A programming button (1
―
3) is
pressed.
l
Vehicle locking/unlocking is done using
the transmitter.
l
The vehicle starts moving.
l
(To cancel the seat activation when using
a programmed advanced key/retractable
type key to unlock the doors)
Perform the following procedure.
l
Turn the ignition switch to the LOCK
position.
l
Press the set button next to the
programming buttons and then the lock
button on the advanced key/retractable
type key within about 5 seconds. A beep
sound is heard after the operation is
completed.
q
Lumbar Support Adjustment
(Driver's Seat)
Manually operated
To increase the seat firmness, pull the
lever forward. Push the lever backward to
decrease firmness.
Electrically operated
The amount of lumbar support can be
adjusted by pressing the switch.
To increase the seat firmness, press and
hold the front part of the switch to the
desired position, then release it.
Press the rear part of the switch to
decrease firmness.
2-8
Essential Safety Equipment
Seats
CX-9_8AU3-EC-09G_Edition1 Page20
Monday, July 13 2009 7:7 PM
Form No.8AU3-EC-09G