Mazda 0000-8F-H28, Installation Instructions Manual

Page: 3 / 23

2. PARTS
MMS ECU KIT (Part no. 0000-8F-Z80)
Part Part Name Qty. Part Part Name Qty. Part Part Name Qty.
MMS ECU
1
Wire Tie
(White 200mm)
5
Urethane
Foam tape
(35 x 115mm)
2
Double-sided
adhesive tape
(25 x 69mm)
1
MMS Key Tag
1
«
Double-sided
adhesive tape
(25 x 25mm)
3
Owner's Manual
1
«
: Part marked with a star mark is not used for this vehicle.
HARNESS KIT (Part no. 0000-8F-H28)
Part Part Name Qty. Part Part Name Qty. Part Part Name Qty.
MMS Harness
1
LED
1
«
Harness Clamp
2
FH Protection
Sheet
1
GPS Film
Antenna
1
GPS Antenna
Cable
1
TEL Film
Antenna
1
TEL Antenna
Cable
1
Antenna
Template
1
«
Electro tap
1
Wire Tie
(White 200mm)
15
Urethane
Foam tape
(35 x 115mm)
2
Installation
Instructions
(ENG/SPA/FRE)
3
A-Pillar Clip
(D651-68-162A)
1
«
Wire Tie
(Black 200mm)
10
(Sold separately) The following parts are also necessary for installation.
HOOD SWITCH KIT (Part no. KD53-V7-629)
Part Part Name Qty. Part Part Name Qty.
Hood switch
1
Screw
1
«
: Parts marked with a star mark are only used on vehicles without theft-deterrent or without i-ELOOP system.
• Verify that the kit includes all the following parts and that they are free of dirt, scratches, or damage.
Note
• These parts are not necessary for vehicles with theft-deterrent or with i-ELOOP system because the hood
switch is already equipped.
Note
3