3. Cut the A-pillar tab wire connecting part B and the
grommet of the A-pillar tether clip.
Passenger Side A-Pillar
Clip B
Clip B
Weather strip
(1)
Clip A
Grommet
Nipper
Lead Wire
Clip B
A-pillar trim
Vehicle Front
A-pillar trim
Guides
Grommet
Tape-wrapped flathead screwdriver
Tape-wrapped flathead screwdriver
(1)
(2)
(3)
Grommet
Tape-wrapped flathead screwdriver
A-Pillar trim removal
1. Partially peel back the seaming welt.
2. Dislodge the Passenger side A-pillar trim by pulling on the
shaded area to disengage Clip B and A.
4.
Remove the A-pillar trim while detaching Guides.
5. Remove the Grommet from the A-pillar by using a flat
head screwdriver by following sequence (1) - (3).
6. Install the new supplied A-pillar tether clip into A-pillar
before proceeding.
Clip B
Clip B
Clip A
Passenger Side A-Pillar
Seaming welt
Part B
Tab
A-Pillar trim
Grommet
Nipper
A-Pillar trim
Vehicle Front
Guides
Grommet
(1)
(2)
(3)
Grommet
Grommet
Hook
A-Pillar inner panel
Tape-wrapped flathead screwdriver
Tape-wrapped flat head screwdriver
Tape-wrapped flat head screwdriver
Front Pillar inner panel
Hook
•
Ensure the new supplied tether clip is used in step 6.
Caution
•
Do not use excessive force, A-pillar could be damaged.
Caution
8
