background image

25

ENG

Technical Details

Cockpit:

Display of:

 

Time 

 

Distance 

 

Calorie consumption 

Technical details:

Motor:  

 

 

DC motor

Constant Motor Power: 

 approx 3.0 5HP/2.21kW

Drive type:  

 

Grooved belt

Speed: 

 

 

1.0 - 20 km/h, in 0.1 km/h adjustable levels

Adjustable Incline: 

 

0 - 15%, in 1.0% electronically adjustable levels

Running deck: 

 

approx. 1,540 x 550 mm

Dimensions: 

 

approx. 1,925 x 925 x 1,470 mm (LXBXH)

Dimensions, folded:   

approx. 1.402 x 925 x 1.541 mm (LxBxH)

Total Weight: 

 

approx. 104 kg

Maximum User Weight: 

140 kg

Power Supply: 

 

220-230V - 50Hz

 

Area of Application:

   

Home Use – for private use only!

 

 

 

 

Semi-Professional Use

Recommended accessories

Disposal

These accessories are the perfect supplement for your training device. All products are 

available in our online shop at www.maxxus.de or directly in our showroom in Gross-Ger-

au.

POLAR® Transmitter Chest Belt T34 (uncoded)

Chest strap for determining the heart rate with optimized transmission ranges. Required 

accessory for the application of pulse-controlled programs and for continuous determina-

tion of the current heart rate.

MAXXUS® floor protection mat

The extreme high density of material and 0.5 cm thickness of this floor mat, gives protec

-

tion against damage, scratches and dirt due to sweat, liquids and movement. Noises are 

greatly minimized.

Available in following sizes:

160 x 100 cm

210 x 100 cm

MAXXUS® Degreaser Spray 

- Optimal cleaning agent for sliding tubes and rollers. 

Frees the sliding tubes and rollers of dirt and cares for the surface.

MAXXUS® Silicone

Optimal lubricant and release agent for running belt and running deck. 

Available in the following sizes:

• 50 ml

• 250 ml

 

Speed

 

Incline

 

Pulse Rate (when using the hand sensors)

 

Heart Rate (when using an optional chest strap)

European Disposal Regulations 2002/96/EG

Do not dispose your training device in the normal household rubbish.

Dispose the device at a communal waste disposal facility or at a registered waste disposal company.

Observe current regulations which apply accordingly. If in doubt seek advice from your local government office 

or county council as to where you can dispose of the device properly and in an environmentally sound manner.

Batteries / Rechargeable Batteries

Batteries and rechargeable batteries should never be disposed of in the household rubbish.

Please be aware that all batteries can contain toxic substances and all consumers are obliged by law to dispose 

these at an appropriate collection point either at your local government office, county council or retail outlet.

If in doubt seek advice from your local government office or county council as to where you can dispose batter

-

ies properly and in an environmentally sound manner. Only dispose of batteries when they are empty.

Summary of Contents for RunMAXX 9.1































Reviews: