background image

9

ENG

Mains Cable

Mains Cable

Connect the power cable coupling to the corresponding plug 

on the Treadmill. Then connect the power cable to an electrical 

socket. 

The device may only be plugged in to grounded sockets which 

have been installed by a professional electrician. Do not use 

multiple sockets to connect the treadmill.

If you need to use an extension cable, it must comply with the 

VDE guidelines.

Main Switch

The main switch is located next to the power connection on the 

front of the Treadmill. This switch turns the treadmill on or off.

Switch position “I” = treadmill switched on

Switch position “0” = treadmill switched off

Fuse

 

Main Switch

Mains Cable  

Connection

Fault-Current Switch (depending on the model)

There is a fault-current button-switch next to the main switch on the front of the motor cover to prevent the treadmill from 

being damaged by electrical surges in the network. This button-switch is triggered off by if a surge in the electrical supply 

occurs and acts as a circuit breaker. In this case the treadmill will be completely switched off. If this occurs, switch off the 

treadmill at the main switch, and pull the mains cable out of the socket with the plug. Press the button on the fault-current 

switch back in. Re-connect the mains cable with the plug and switch the treadmill back on at the main switch.

Fuse (depending on model)

To protect the treadmill from damage caused by overvoltage of the mains there is a fuse next to the main switch on the front 

of the engine cover. This breaks the circuit in the event of an overvoltage, the treadmill is completely switched off. If this 

happens, turn off the treadmill with the main power switch and unplug the power cable from the wall socket. Check the fuse 

and replace if necessary. Then re-connect the power cable to the socket and switch the treadmill back on using the main 

switch.

 

To protect the treadmill from being used by unauthorised third parties, always remove the mains cable and keep it stored 

away in a separate place and out of the reach of unauthorised persons, such as children.

May vary depending on the model

Disabling Function

Summary of Contents for RunMAXX 9.1































Reviews: