6
Step 3: Assembly of the Cockpit
Ideally, you will need 2 people for this step.
Connect the plug on the cable protruding from the cockpit to the appropriate plug on the cable protruding out of the cockpit
frame. In this case, a confusion is not possible because the plug connectors are easy to identify. Now insert the cockpit from
above into the corresponding mounts of the cockpit frame and slide the cockpit as down until the four boreholes are aligned
with the boreholes on the cockpit mounts. Fix the cockpit to the cockpit frame using four Allen screws M8x15.
CAUTION:
Make sure that the cables do not get damaged or jammed when you insert the cockpit into the frame.
Step 4: Assembly of the Cockpit Rear Cover
Place the rear cockpit cover onto the back of the cockpit and fix it with four tapping screws ST4x16.
Assembly
Hexagon Socket Screw, M8x15
Cockpit Frame
Cockpit
Cockpit Rear Cover
Tapping Screw, ST4x16
