23
ENG
My training device makes noises during training – is this normal?
In addition to the air resistance braking system which creates construction and the air flow noises when in use,
noises also occur from the chain pulley. Your MAXXUS® training device is fitted with extremely high-quality
components which ensure that all operating, air flow and chain noises are greatly reduced.
However, it is possible and normal that slight mechanical noises can be heard during training. These mechanical
noises, which can occur either continually or at intervals, are created by the sometimes very high speed of the
sliding seat during training. Also, the moving parts can generate noise during training due to the hollow metal
tubes which act as a resonator and amplify the sound.
It is completely normal for the operating noise to get louder during training. This can be explained by an in-
crease in training speed. The components can also expand with the heat generated during training.
The cockpit does not show anything in the display when I turn it on.
Check if the battery is charged and change them if necessary. Check if the control cable has been pinched or
jammed during assembly and / or if the connector has come loose.
The values for rowing strokes/minute and distance are at “0” during training
Check if the control cable has been pinched or jammed during assembly and / or if the connector has come
loose.
My training device makes creaking noises during training.
Check if the training device is standing firmly and evenly on the ground. If necessary re-adjust the stabilizers.
My feet fall asleep during training.
The reason for this is often that training shoes are done up too tightly. Your feet will expand when you are under
exertion and so you should do up your shoes more loosely. You can also get advice regarding this from sports
shops or specialist running shoe shops.
FAQ
