Maxwell MW-1756, Manual Instruction

Page: 8 / 24

8
ENGLISH
THERMOPOT MW-1756
An electric thermopot is intended for boiling
water and maintaining the temperature of hot
water.
DESCRIPTION
1. Minimal water level mark
2. Water level scale
3. Spout for pouring water
4. Water boiling mode indicator «Boiling»
5. Keep warm indicator «Keep warm»
6. Lid opening button
7. Lid
8. Hand pump for water dispensing
9. Hand pump mechanical lock « / »
10. Steam release openings
11. Carrying handle
12. Body
13. Power cord connector
14. Rotary base
15. Power cord
ATTENTION!
For additional protection it is reasonable to
install a residual current device (RCD) with
nominal operation current not exceeding
30 mA, to install RCD, contact a specialist.
SAFETY MEASURES
•
Before using the electric thermopot, read
this instruction manual carefully.
•
Make sure that the operating voltage of
the unit corresponds to the voltage of your
mains.
•
The power cord is equipped with a «euro
plug»; plug it into the socket with reliable
grounding contact.
•
To avoid fire, do not use adapters for plug-
ging the unit in.
•
Do not connect or disconnect the power
cord with wet hands, this may cause electric
shock or injuries.
•
When unplugging the unit, always pull the
plug but not the cord.
•
Never leave the operating unit unattended.
•
Do not switch the thermopot on if it is empty.
•
Do not drop or tilt the unit.
•
Use the thermopot only for water boiling;
it is prohibited to heat or boil other liquids
in it.
•
Ensure that water level in the thermopot is
not below the minimal level mark and not
above the «FULL» mark on the inner surface
of the thermopot flask.
•
Do not fill the thermopot with water directly
from the faucet; to fill the thermopot use a
suitable bowl.
•
Place the thermopot on a flat dry and stable
surface; do not place the thermopot on the
edge of the table.
•
Do not place the thermopot next to the
walls or close to the kitchen furniture.
Place the thermopot keeping at least
20 cm gap between the thermopot body
and the wall and at least 30 cm gap above
the thermopot.
•
Do not use the unit near heat sources or
open fire.
•
Do not let the power cord hang from the
edge of the table and make sure it does not
touch hot or sharp edges of furniture.
•
Do not open the lid and do not pour water
out during boiling.
•
Do not rotate the unit during water pouring.
•
Do not apply excessive effort when closing
the lid. When using the thermopot, make
sure that the lid is closed tightly.
•
Keep your hands away and do not bend over
the steam release openings, it may cause
burns. Do not block the steam release open-
ing with any objects.
•
Do not touch hot surfaces of the thermopot.
•
Be careful while carrying the thermopot
filled with boiling water.
•
Do not carry the thermopot holding it by the
lid opening button.
•
Be careful when pouring out hot water.
•
Remove the lid before draining the remain-
ing hot water from the thermopot flask.
•
To avoid risk of electric shock, do not
immerse the thermopot, the power cord
and the power plug of the unit into water or
other liquids.
•
Unplug the unit, if you are not using it or
before cleaning.
•
Do not wash the thermopot in a dishwash-
ing machine.
•
Before taking the unit away for long storage
or before cleaning, unplug it, pour out water
and let the unit cool down and dry.
•
For children’s safety reasons do not leave
polyethylene bags used as packaging unat-
tended.
MW-1756.indd 8 8/28/19 4:55 PM