34
Chapter 7 Service and Maintenance
IMPROTANT :
◎ Do not reuse a lint-free optical wipe or swab.
◎ Do not touch the protective lens of the fiber connector.
◎ Do not blow directly, or else new dirty will be brought.
◎ Do not touch the tip of the cleaning swab with your fingers.
◎ Cleaning is necessary before place the protective cover and sleeve.
◎ Never blow air directly at the surface, because you could imbed
contaminants into the surface. Always blow across the surface!
◎ If the fiber connector could not be installed in optical system
immediately, please cover it with the protective cap cleaned with
compressed air.
CAUTION :
◎ It is hereby stated that damage to the fiber connector can occur due
to mishandling, the use of incorrect cleaning procedures, or chemicals for
cleaning. This is not covered by the Maxphotonics' warranty.
