12
Chapter 2 General Safety Information
applicable) with the same types and ratings. The use of other fuses or
material is prohibited.
4、Make sure that the input AC voltage of the laser is the voltage of
the normal AC mains (Three-phase four-wire 380V AC), and wires are
connected accurately. Any incorrect wiring method may cause damage to
people or instrument.
5、The equipment does not have any part which can be maintained by
operators, and all the maintenance operations must be finished by the
professionals of Maxphotonics Co., Ltd.
6、To prevent electrical shock, do not remove enclosure, detach the laser
without permission and damage the relevant signs. Any product with
unauthorized dismounting shall not be subject to warranty.
WARNING:
◎ The input voltage of the laser is triple-phase AC current (380V AC),
which may cause risk of electric shock. All the relevant cables and
connection wires have potential hazards.
5、Environment Conditions and Precautions
For ensuring the safety of the laser working area, suitable enclosures
shall be applied, including but not limited the laser safety signs and the
interlocking devices. Corresponding operators must be trained and
examined and know the normal safety specifications for operating the
laser.
Meanwhile, it is important that the output components shall not be installed
at eye level.
Because of interaction of the laser and the metal material, the radiation of
high-level ultraviolet light or visible light may be produced. Make sure that
the laser is provided with the protective cover to prevent the eyes or other
parts of human bodies from damage by radiation.
