22
1-Unpacking Steps
The laser is precise valuables, so Maxphotonics recommends that you
unpack the packing box according to the following steps:
1、Place the packing box containing the laser on a horizontal platform
such as the floor or a large table;
2、Open the primary box and remove the foam cover;
3、Check the fittings according to the ''Packing List'';
4、There is fiber cable on top of the laser, please carefully take it out
from the box and ensure that the maximum bending radius of the optical
armoured cable is greater than 200mm. Hoist the laser out of the packing
box with qualified device. The laser can be moved with casters. Transport
without the euro-pallet is not permitted. The Laser can be moved with
fixable casters to the final place of installation if the sub font is appropriate
to it. The laser has to be installed on a plane base. Against autonomous
movement the laser has to be secured through fixing the casters.
5、Keep the working environment dry, ventilate-well and dust-free. The
laser must be brought in such a position that doors and side panels can
be reached for service (1 meter space to each side) and without drip or
hydrops.
6、Connect the Water In/Out port of the laser air-conditioner and the
external drainpipe with the stainless water pipes enclosed in the packing
box and fasten them with hose clamps. The drainpipe should be brought
Chapter 5
Unpacking Guide
