Maxon GPC X1-LDF, Installation Manual

Page: 58 / 76

Adjusting the liftgate
52
5.4 Checking the stop on the foldover section of the platform

Check the stop on the foldover section of the platform.
IMPORTANT: The roller (1) on the support arm (2) must remain against the stop (3)
throughout the entire lifting process. If necessary, loosen the stop (3) and shift it
slightly by loosening 2 cheese-head screws (4). At the same time, the stop (3) must
not be shifted too far. When the platform is folded over, the plastic spacer (5) must
hold the platform in place (see Fig. 80).
Legend:
Item 1 Roller on support arm
Item 2 Support arm (supports foldover section of platform when platform is open)
Item 3 Stop (on foldover section of platform)
Item 4 Cheese-head screw (2 pieces)
Item 5 Plastic spacer (holds platform in driving position)
Fig. 80