Maxon GPC X1-LDF, Installation Manual

Page: 23 / 76

Preparing for installation
17
No preparation according to ETMA Code A and Code B
Power cable

Insert the positive cable (25
mm² red) (“power unit cable”) for the power supply
into a length of slit corrugated tubing (see Fig. 19).
NOTICE

Do not yet connect the cables.
Route the positive cable
(red) and negative cable
(blue) to the terminals but
do not yet connect them
(see Fig. 20).
Legend:
Item 1 Positive cable (red) Part No. 20 907 673
Item 2 Negative cable (blue) Part No. 20 907 673
Item 3 Connector for cabin switch unit Part No. 20 910 754
Fig. 19
Fig. 20