TECHNICAL DATA
11 - 5
D-MAXE with OI-TS
www.maxcessintl.com
MI 2-292 1 C
Tec
hnD
ate
n.
fm
Jobs
* It is possible that the sensor being used is already returning a
center signal. In this case, center guiding will be performed.
** On a D-MAXE 3, S3 is connected to both X9/1 and X11/2, and
S4 is connected to both X11/1 and X9/2 and will generally be
referred to as X11/1.
Note:
Because of the possibility of customer-specific programming,
individual jobs cannot be present or cannot be used differently
than listed in the table. Customer-specific software adjustments
of this type are described in the "Supplementary Operating
Instructions" for the D-MAXE system and are included in the
system documentation.
Job
Connection
Type of Guiding
A
S1
X5/1
Edge guiding*
B
S2
X5/2
Edge guiding*
C
S3
X9/1**
Edge guiding*
D
S4
X9/2**
Edge guiding*
E
S1 - S2
X5/1&2
Center guiding or
slave guiding
F
S3 - S4
X9/1&2**
Center guiding or
slave guiding
G
S1 - S3
X5/1 & X9/1**
Center guiding or
slave guiding
H
S2 - S4
X5/2 & X9/2**
Center guiding or
slave guiding
J
X5
X5/2
Line center guiding
K
X9
X9/2**
Line center guiding
L
X5
X5/1
Line edge guiding
M
X9
X9/1**
Line edge guiding
