CONTROLLER MENUS: 1Y.5 HARDWARE IOS
7 - 28
D-MAXE with OI-B/OI-N
www.maxcessintl.com
MI 2-296 1 D
Menu 1y.5.1.5 Line
Speed (X1)
Description
The
Line Speed menu is used to calibrate the analog Line Speed
signal. This signal affects the guiding sensitivity of the drive.
If appropriate customer-specific programming is present, this
signal can also be used in other ways.
Menu
Key sequence for menu
1y.5.1.5:
The Line Speed signal that is currently present is shown in the
bar graph.
∙
Start the sequence for calibrating the
Line Speed parameter
Menu 1y.5.1.5.1
1. Set Minimum Speed
The reference value for the minimum web speed must be
determined.
To do this, the material web with the relevant application must
be running at minimum web speed in the customer system.
∙
Determine the reference value for the
Min. Speed
of the
web
Menu 1y.5.1.5.2
2. Set Maximum Speed
The reference value for the maximum web speed must be
determined.
To do this, the material web with the relevant application must
be running at maximum web speed in the customer system.
1y.5
→
Hardware IOs
or
1y.5.1
→
Sensor Setup
or
1y.5.1.5
→
Line Speed
or
. . .
. . .
1y
