CONTROLLER MENUS: 1Y.5 HARDWARE IOS
7 - 36
D-MAXE with OI-B/OI-N
www.maxcessintl.com
MI 2-296 1 D
Menu 1y.5.1.7.2
Dimension
Note:
The encoder must be calibrated before this parameter can be set
Menu 1y.5.1.7.1 Calibration, page 7-32
).
Description
You can use the
Dimension menu to enter the calibrated travel
path of the encoder. This serves to correct the value derived
from calibration of the encoder (see also
, Enter the distance).
The drive must be moved to its thresholds and the distance
must be measured. Enter the measured distance in this menu.
If this information is not required for the relevant customer
application, the entry should be set to the default value = 0.
Menu
Key sequence for menu
1y.5.1.7.2:
The current setting for the
Dimension parameter is shown here.
Enable the parameter for input
1y.5
→
Hardware IOs
or
1y.5.1
→
Sensor Setup
or
1y.5.1.7
→
Encoder (X3)
or
1y.5.1.7.2
→
Dimension
or
. . .
. . .
