MAXA N-P35A2, User& Installer'S Manual

Page: 25 / 34

24
■ PARTS IDENTIFICATION
n
Control panel
o
Air outlet
p
Remote control receptor
q
Carrying Handle
r
Upper air inlet grille
s
Heat air exhaust vent
t
Lower air inlet grille
u
Power cord
NOTE: The illustrations are for explanation purposes
only. The actual shape of the machine you purchased
may be slightly different.
Front view
1
2
3
Rear view
4
5
6
7
8
■ AIR CONDITIONER CONTROL PANEL
The unit can be controlled by the unit control panel alone or via the remote controller.
NOTE : the following illustration is for explanation purposes only: the actual shape of the control panel of the unit you
purchased may be slightly different (the working functions are the same).
■ LCD DISPLAY INDICATORS
1 3
3
6 5
2
■ Buttons functions on the control panel
n
Power button:
Press once to start and press once more to stop the unit.
o
Mode button:
Press this button to change the operation mode in order of: COOL Î DRY Î FAN Î HEAT
p
Adjustment button " " e " ":
In "COOL" or "HEAT" mode, press " " once, the temperature. will decrease 1°C(°F).
Press the button " " once, the temperature will increase 1°C(°F). The temperature can be selected from
16°C(61°F)
~30°C (86°F).
q
Fan button:
Press the button to change the operation fan in order of LOW Î MED Î TURBO Î AUTO
r
Timer button:
Press timer button of enter into timer setting mode. Under this mode, press " " or " " button to adjust the timer
setting. Timer setting will increase or decrease 0.5 hour by pressing " " or " " button within 10 hours. After timer is
finished, the unit will display temperature if there’s no operation for 5s. If timer function is started up, the upper
indicator will keep the display status. Others, it won’t be displayed. Under timer modes, press timer button again to
cancel timer mode.
s
Sleep button:
Press sleep button to enter into sleep mode. If the controller operates at cooling mode,
after sleep mode is started up, preset temperature will increase by 2°C within 2 hours and then the unit twill operate at
this temperature all the time. While, if the controller operates at heating mode, after sleep mode is started up, preset
temperature will decrease by 2°C within 2 hours and then the unit will operates at this temperature all the time. Sleep
function is nor available for fan mode, drying mode and auto mode. If sleep function is started up, the upper indicator
will keep the display status. Others, it won’t be displayed.