MAXA N-P35A2, User& Installer'S Manual

Page: 30 / 34

29
- If the inner height of the window is between 24" (609mm) and 36.8"
(934mm) inclusive.
(1) Open the window sash and place the window panel on the window
frame.
(2) Slide the adjustment panel to fit the window frame height.
(3) Secure the window panel to the window frame with 3 screws.
Adjustment
panel
24"~36.8"
- If the inner height of the window is between 36.8" (934mm) and 48"
(1219mm) inclusive.
(1) Attach the extension panel to the adjustment panel.
(2) Open the window sash and place the window panel on the window
frame.
(3) Slide the adjustment and extension panels to fit the window frame
height.
(4) Secure the window panel to the window frame with 4 screws.
Extension panel
36.8"~48"
- If the inner height of the window is between 36.5" (927mm) and 64"
(1625mm) inclusive.
(1) Open the window sash and place the window panel on the window
frame.
(2) Slide the adjustment panel to t the window frame height.
(3) Secure the window panel to the window frame with 4 large wood
screws.
36.5"~64"
Window slider
bracket
4. Cut the foam seal (adhesive type) A to the proper length and
attach it on the top of the window.
5. Close the sliding sash securely against the window.
Foam seal A
(adhesive type)
6. Cut the foam seal to an appropriate length and seal the open gap
between the top window sash and the outer window sash.
Foam seal
7. Attach a bracket with the screw.
● Install rear clip
Aim the rear clip(upper) at the rear clip(lower), fix them together, press
the clasp forcibly in to the groove.
clasp