MAXA N-P35A2, User& Installer'S Manual

Page: 24 / 34

23
Note: This function is not available for this unit.
● X-FAN FUNCTION
Pressing X-FAN button in COOL or DRY mode, the icon is displayed and the indoor fan will continue operation for
10 minutes in order to dry the indoor unit even though you have turned off the unit.
After energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.
● TEMP FUNCTION
Press TEMP key to show the set point temperature, indoor ambient temperature and outdoor ambient temperature on
the unit’s display.
Note: Outdoor ambient temperature is only displayed for some models.
● TIMER MODE SETTING
Push the buttons TIMER to set the timer programming as wished in order to switch on and off the air conditioner at the
desired time.
- How to set TIMER ON
TIMER
button can be used to set the timer programming as wished in order to switch on the appliance at your desired
time.
1) Press TIMER button at unit ON "HOUR ON" flashes on the LCD, then you can press the ''
+ '' or '' - '' buttons to select
your desired time for appliance on.
♦ Press the '' + '' / '' - '' button once to increase or decrease the time setting by 1 minute.
♦ Press the key '' + '' / '' - '' for 2 seconds to increase/decrease the time setting by 10 minutes.
Note: If you don't set the time in 10 seconds after you press TIMER ON button, the remote controller will exit the
TIMER ON mode automatically.
2) When your desired time displayed on LCD, press the TIMER button and confirm it, a beep can be heard and then
the TIMER indicator "HOUR ON" the indoor unit stops flashing.
- How to cancel TIMER ON
Press the TIMER button again, a "beep" can be heard and the indicator disappears, the TIMER ON mode has been
cancelled.
Note: It is similar to set TIMER OFF; you can make the appliance switch off automatically at your desired time.
● TURBO MODE SETTING:
♦ TURBO mode is used to start or stop fast cooling and heating at high fan speed.
♦ In Turbo mode, you can set airflow direction or timer. If you want to exit from TURBO mode, press any - TURBO,
MODE, FAN or ON/OFF button, the display will return to the original mode.
● SLEEP MODE SETTING
SLEEP mode can be set in COOLING or HEATING operation mode. This function gives you a more comfortable
environment for sleep.
In SLEEP mode,
♦ Fan speed is automatically set at low speed.
♦ Press the "SLEEP" button to set the unit to the sleep mode. The SLEEP indicator will light up on the display. The
temperature increases/decrease in cooling/heating mode operation by 1°C at set intervals. After reaching 2°C the unit
maintains this temperature through to the eighth hour (8 hours) of operation in the "SLEEP" mode and then switches
off automatically.
● LIGHT FUNCTION
Press LIGHT button to turn on the display's light and press this button again to turn off the display's light. If the light is
turned on, is displayed. If the light is turned off, disappears.
● LOCK FUNCTION
Press the '' + '' and '' - '' keys at the same time to block the last setting operation by the remote controller.
All the keys disabled, including the ON/OFF key. Press the '' + '' and '' - '' keys again to enable the buttons functions.
● °C / °F FUNCTION
Press the '' MODE '' and '' - '' buttons at the same time with the unit off to choose the display of temperature in °C and °F.