background image

4

5. DISCONNECT THE COMPRESSOR

Always disconnect the compressor from the 
power plug and remove the compressed air 
from the air tank before servicing, inspecting, 
maintaining, cleaning, replacing or checking 
any parts.

6. AVOID UNINTENTIONAL STARTING

Do not carry the compressor while it is con-
nected to its power source or when the air 
tank is filled with compressed air. Be sure 
the knob of the pressure switch in the "OFF" 
position before connecting the compressor 
to its power source.

7. STORE COMPRESSOR PROPERLY

When not in use, the compressor should be 
stored in dry place. Keep out of reach of chil-
dren. Lock-out the storage area.

8. KEEP WORK AREA CLEAN

Cluttered areas invite injuries. Clear all work 
areas of unnecessary tools, debris, furniture, 
etc.

9. KEEP CHILDREN AWAY

Do not let visitors contact compressor exten-
sion cord. All visitors should be kept safely 
away from work area. Keep out of reach of 
children.

10. DRESS PROPERLY

Do not wear loose clothing or jewelry. They 
can be caught in moving parts. Wear protec-
tive hair covering to contain long hair.

11. DON'T ABUSE POWER CORD

Never yank it to disconnect from receptacle. 
Keep power cord from heat, oil and sharp edges.

12. MAINTAIN COMPRESSOR WITH CARE

Follow instructions for lubricating. Inspect 
cords periodically and if damaged, have re-
paired by authorized service facility.

13. USE A SAFE EXTENSION CORD

In order to prevent an electric shock, use a 3-
core extension cord with a 3-pole earthing 
plug and a 3-core earthing plug socket.  
Make sure that the extension cord is in the 
good working condition.  If the cord is dam-
aged, replace or repair it.  The cord should 
have a sufficient capacity for the current run-
ning to the product.  The cord of an insuffi-
cient capacity will cause a voltage drop or an 
electric power loss, resulting in overheating.  
The following table shows the cord size used 
depending on the cord length.
If the compressor is to be used outdoors, use 
an exclusive extension cord.

Tab.1 SECTION VALID FOR A MAX LENGTH 
OF 20m (65')

Avoid electrical shock hazard. Never use this 
compressor with a damaged or frayed electrical 
cord or extension cord. Inspect all electrical 
cords regularly. Never use in near water or in any 
environment where electric shock is possible.

14. STAY ALERT

Watch what you are doing. Use common 
sense. Do not operate compressor when you 
are tired. Compressor should never be used 
by you if you are under the influence of alco-
hol, drugs or medication that makes you 
drowsy.

OFF

  AC

110V

COMPRESSOR

HP

kW

110V (mm2)

AKHL1230E (UK)

2

1.5

4~6

WARNING

AKHL1230E_UK.fm  4 ページ  2008年12月10日 水曜日 午後6時4分

Summary of Contents for powerlite AKHL1230E

























Reviews: