background image

7

33. THIS COMPRESSOR IS FOR INDOOR 

USE. DO NOT INSTALL THE COMPRES-
SOR IN ANY PLACE EXPOSED TO RAIN 
OR SPLASHED WATER, HIGH-HUMIDITY 
PLACE OR HIGH-TEMPERATURE PLACE

If used in the wet condition, it could produce 
an electric shock or be short-circuited, result-
ing in ignition.  Use it under the environmen-
tal conditions provided by its specifications.

34. DO NOT OPERATE THE TOOL NEAR A 

FLAMMABLE SUBSTANCE

Never operate the tool near a flammable 
substance (e.g., thinner, gasoline, etc.). Vol-
atile fumes from these substances could be 
drawn into the compressor and compressed 
together with the air and this could result in 
an explosion.

35. NEVER USE THE TOOL IN AN EXPLO-

SIVE ATMOSPHERE

Sparks from the tool may ignite atmospheric 
gases, dust or other combustible materials.

36. BE SURE TO EARTH THE COMPRESSOR

Earth the compressor to prevent a worker 
from getting an electric shock.  It comes with 
a 3-pole cord and a 3-pole earthing plug so 
that it can be connected to an appropriate 
earthing plug socket.
A green-and-yellow striped wire is an earth-
ing conductor.  Never connect it to other 
charged terminals. 

37. WHEN CARRYING THE COMPRESSOR, 

HOLD IT CORRECTLY.

38. TAKE CARE TO TRANSPORT THE COM-

PRESSOR CORRECTLY, DO NOT OVER-
TURN IT OR LIFT IT WITH HOOKS OR 
ROPES.

39. WHEN DISPOSING THE MACHINE OR TIS 

PARTS, FOLLOW THE RELEVANT NA-
TIONAL RULES.

Thinner

Gasoline

AKHL1230E_UK.fm  7 ページ  2008年12月10日 水曜日 午後6時4分

Summary of Contents for powerlite AKHL1230E

























Reviews: