BLADE
1-2
TI215G0010
General information
pURpOSE OF DOCUMENT
This manual contains the technical characteristics,
the performance, the transportation and installation
rules, the instructions for use, and the preventive and
corrective maintenance operations of the machine
manufactured by Ing. ENEA MATTEI S.p.A.
NOTE
This manual should be considered an
integral part of the machine, and should
stay with it during the entire life span of the
equipment.
Keep this manual and all of the attached
documents in a place easily accessible
to all staff in charge of the control or
the maintenance of the machine. Ing.
ENEA MATTEI S.p.A. reserves the right to
subject the supply of further copies to the
repayment of charges and the acceptance
of special provisions with respect to the
ligitimate defense of intellectual, patent,
and executive identity and functional
property of the product and/or its parts.
It is understood that forwarding all or part of
this manual to third parties is not tolerated
unless with the prior written consent of Ing.
ENEA MATTEI S.p.A. for both the text, the
illustrations and the diagrams attached.
Ing. ENEA MATTEI S.p.A. reserves the right
to make changes without prior notice.
Any change, supplement or suppresion of
elements, components, functions or cycles
of the machine, not previously agreed
upon with Ing. ENEA MATTEI S.p.A. releases
the manufacturer from any responsibility
whatsoever.
This manual is for the user and the service engineer of
the machine, and it aims at supplying them with the
basic technical data typical of the system, a technical
description of the several operating groups that form
it as well as the essential use procedures and the
information necessary to perform preventive and
corrective maintenance.
This manual is for staff with a sound knowledge of the
processing technique, of mechanical and electrical
diagrams, and is for both those in charge for the use of
the machine and the service engineers.
This manual is an integral part of the machine and
contains information that aims at granting all staff safe
working conditions and guaranteeing perfect efficiency
during the life span of the machine.
For a correct use of the machine, it is assumed that the
working environment is adequate to current regulations
concerning safety and hygiene.
DIRECTIvES AND TECHNICAL STANDARDS AppLIED
The machine has been designed, made, and inspected
in compliance with the “safety and health essential
requirements” stated in attachment I to the European
Directive CE. The list below gives the reference Standards
used by Ing. ENEA MATTEI S.p.A. to design, make, and to
make the final inspection of the machine.
LIST OF DIRECTIvES AND TECHNICAL HARMONIZED
STANDARDS
MACHINERY DIRECTIVE CE
ELECTROMAgNETIC COMPATIBILITY (EMC) DIRECTIVE CE
LOW VOLTAgE DIRECTIVE CE
EN 1012-1 Compressors and vacuum pumps - Safety
Requirements - Compressors
F
