5 Operation on the Main Unit
32
HARS series
5-1-12 Setting Power Failure Protection Function
This product has a built-in circuit to stop the output upon power failure recovery.
When power is restored after a power failure during operation, the output will be stopped.
To output again, turn ON the output to start.
If you are not using the power failure protection function, set the power failure protection to OFF
(Disable).
At the time of power outage recovery, or when the POWER ON/OFF switch is set to ON, the device will
return to the state maintained when the input was cut.
To switch the power failure protection function, touch the power failure protection display.
Mode setting screen
Home screen
Menu screen
Power failure proetection screen
Power failure
protection display
Summary of Contents for HARS Series
