10
Matrox G200 MMS – User Guide
Quick connection setup
1
Connect video input
To use a video camera or video player
*
as a
video source, you need a composite video
(RCA) cable. This type of cable is available at
most electronics stores.
a
Plug one end of your video cable into
the video connector on your dual-
monitor adapter.
Use the composite video connector on
the dual-monitor adapter connected to
the
#1/#2
connector on your Matrox
graphics card (bottom part of the
bracket).
b
Plug the other end into the
VIDEO OUT
†
connector (usually yellow) on your
video camera or video player.
For more information on video input devices,
see “Matrox video input”, page 12
.
* A
video player
can be any device that generates a video signal (for example, a VCR, videodisc player, or DVD player).
† The labels on your devices may not be consistent with what’s in this guide. Different manufacturers sometimes use different labels
for the same type of controls and connectors. For example, the
VIDEO IN
connector on your TV may be labeled
VIDEO 1
(or
VIDEO 2
). To match labels, see the documentation for your video devices.
Note:
If your video camera or video player
only
uses a SCART
audio/video connector (see picture), you may need to purchase a
SCART adapter. For more information,
.
Video camera or
video player
Connector
#3/#4
Composite
video cable
Connector
#1/#2
