5
3.1 reCommeNded CleaNiNG TiPS
3.2 CHeCk for damaGed ParTS
do NoT
use any equipment that is damaged or has worn or broken parts. Use only replacement parts supplied by Matrix Fitness Systems.
maiNTaiN labelS aNd NamePlaTeS
. Do not remove labels for any reason. They contain important information. If unreadable or missing,
contact Matrix Fitness Systems for a replacement at 866-693-4863 or www.matrixfitness.com.
maiNTaiN all eqUiPmeNT.
Preventative maintenance is the key to smoothly operating equipment. Equipment needs to be inspected at
regular intervals. Defective components must be kept out of use until they are repaired. Ensure that any person(s) making adjustments or
performing maintenance or repair of any kind is qualified to do so. Matrix Fitness Systems will provide service and maintenance training at our
corporate facility upon request or in the field if proper arrangements are made.
CHaPTer 3: PreVeNTaTiVe maiNTeNaNCe
in order to maximize life span, and minimize down time, all matrix fitness equipment requires regularly
scheduled cleaning.
yoU Will Need:
- Mild dish soap and water mixture in a spray bottle (10:1 water to soap ratio).
- Lint free 100% cotton cleaning cloths or Micro fiber cleaning cloths.
- Vacuum / Shop Vac with extendable hose and soft brush attachment.
- Computer screen or LCD / LED screen cleaner.
daily:
1. Wipe down the unit after each use with a mild dish soap and water mixture.
NOTE:
Spray the soap / water mixture onto the cloth.
NEVER spray directly onto the equipment. We recommend that you do NOT allow customers to use spray bottles to clean the equipment. If
the cleaner is sprayed directly on the equipment or over spray is present, it may cause your equipment to rust and / or cause damage to con-
sole overlays.
Weekly:
1. With a clean dry 100% lint free cloth and water / soap mixture, wipe any dust and dirt from the sides of the running deck between the run-
ning belt and side rails.
2. With a clean dry 100% lint free cloth and water / soap mixture, wipe the dust from the top of the motor cover.
3. With a clean dry 100% lint free cloth and water / soap mixture, wipe down the entire console area including the hand grips and hand rails.
4. Use a computer screen cleaner or LCD / LED screen cleaner on the touch screen portion of the console (see Section 3.4).
moNTHly:
1. Vacuum under and around the Treadmill. If you need to move it, unplug the unit first.
2. Vacuum the air vent on the front of the unit.
qUarTerly:
1. Unplug the unit. Remove the motor cover. Use a vacuum with a soft brush extension, vacuum the dust and dirt from the motor, MCB, fan,
and surrounding areas. Be careful not to hit any of the wire connections.
