231
Matrix SETU VFXTH System Manual
•
Click the
Configuration
link.
•
By default,
Auto Configuration Upgrade
check box is enabled. You may clear this check box, if
required.
•
Protocol for Auto Configuration Upgrade:
Select the protocol used by the Auto Configuration Server
to upgrade the configuration. SETU VFXTH generates file transfer request to the Auto-Configuration
Server according to the protocol you select. You may select
TFTP
,
HTTP
or
HTTPS
.
Default: HTTP.
•
Server Address: Port:
Enter the IP Address/Domain and the Port of the Auto Configuration Server on
which the configuration files of SETU VFXTH are stored.
The Auto Configuration Server Address can also be obtained by SETU VFXTH using DHCP (using
Option 224). To fetch Auto Configuration Server Address using DHCP, keep the Server Address: Port
field blank.
If you want SETU VFXTH to get the Server Address from the DHCP server, keep this field blank. Make
sure that you also set the
Connection Type
on the
page to
DHCP
.
The default Port differs as per the protocol you select. For TFTP, the Default Port is 69. For HTTP, the
Default Port is 80. For HTTPS, the Default Port is 443. You can change the port as per your
requirement. Valid Port Range: 69, 80, 443, 1031 to 65534.
•
Configuration Folder Path:
Specify the path of the folder on the Auto Configuration Server where the
configuration file is stored. Default: Blank.
•
Upgrade Configuration Automatically at Every Power ON:
Enable this check box, if you want SETU
VFXTH to check for updates in the configuration file at each Power ON.
At Power ON, if both Auto-Firmware upgrade and Auto-Configuration upgrade is enabled, Auto-Firmware
upgrade has priority over Auto-Configuration upgrade.
