Matrix SETU VFXTH System Manual
200
Configuring Call Hold
This feature will work only if,
•
Call Hold is enabled in the
Class of Service
of the FXS Port
•
The
Subscriber Type
of the FXS Port is configured as
Gateway
.
For instructions on enabling features in the Class of Service of the FXS Port and configuring Subscriber Type, see
under
Basic Settings
.
How to use Call Hold
•
You are in speech with party A.
•
To put your call with A on hold, dial
Flash
.
•
A is put on hold. You get feature tone for 7 seconds, followed by error tone.
•
To retrieve the call you put on hold, dial
Flash
again during feature tone or during error tone.
•
You will be in speech with A.
•
If you go On-hook during the feature tone, your call with party A will be disconnected.
•
If you go On-hook during error tone, you will get ring back. If you go Off-hook when your phone rings,
you will get connected with party A again.