manualshive.com logo in svg

Matrix SETU VFXTH, System Manual, Page: 175 / 322

Share
Download
Matrix SETU VFXTH System Manual Download Page 175

Matrix SETU VFXTH System Manual

170

The 

Digest Authentication

 Table page opens. You can configure up to 500 entries in this table. This Table 

is common for all SIP Trunks.

•

Enter the user name assigned to the caller/calling device in the 

User ID

 field. SETU VFXTH will use 

this User ID to match the digest credentials sent by the caller/calling devices when challenged. 

Make sure the User ID you enter here and the User ID assigned at the 

calling end

 are the same. The 

User ID can be up to 40 characters long. Default: Blank.

•

Enter the password to authenticate the user ID in the 

User Password

 field. The password may consist 

of a maximum of 24 characters. Default: Blank.

Make sure the User Password you enter here and the User Password assigned at the calling end are 
the same. 

 

•

Click 

Submit

 to save the entries. 

•

Now, enable Digest Authentication on the desired SIP Trunk. See 

“SIP Trunks”

 under 

Basic Settings

 for 

instructions.

Summary of Contents for SETU VFXTH



































































































































































































































































































































Reviews:

No comments