113
Matrix SETU VFXTH System Manual
If you have enabled
CLIR
and
Identity header in INVITE message
is configured other than None, then
SETU VFXTH will add
Privacy = ID
header in the INVITE message during an outgoing call from the SIP
Trunk.
•
If you select
P-Preferred Identity
or
P-Asserted Identity
in
Identity header in INVITE message
, then
select the desired option for sending
SIP ID in Identity header of INVITE message
during an outgoing
call. You may select:
•
Send SIP ID configured,
•
Send Caller ID received on Source Port,
•
Send Caller ID after applying Reverse DDI logic,
•
Send Fixed Number.
Default: Send SIP ID configured.
•
If you select
Caller ID after applying Reverse DDI logic
, SETU VFXTH allows you to configure the
desired option for
If no match found using Reverse DDI logic
. You may select:
•
SIP ID configured
•
Caller ID received on Source Port
•
Fixed Number.
Default: SIP ID configured
•
If you select
Send Fixed Number
option for
SIP ID in "FROM" header of INVITE message
or
If no
match found using Reverse DDI logic
, you must configure the Fixed Number. The Fixed Number
can be a maximum of 24 characters. Characters 0-9, +, * # and dot(.) are allowed. Default: Blank.
•
Select the
Reverse DDI Reference ID
,
if you have selected
Caller ID after applying Reverse DDI logic
as
SIP ID in "FROM" header of INVITE message
and/or
Send Caller ID after applying Reverse DDI logic
as
SIP ID in Identity header of INVITE message
.
SETU VFXTH will compare the Reference ID configured on the SIP Trunk with the one configured in the
SIP Trunk - Destination Number Determination: DDI Number Based Table. If a match is found, SETU
VFXTH will send the corresponding DDI Number to the Called Party.
•
You can apply
Automatic Number Translation logic
on outgoing calls made from the SIP Trunk.
•
To apply ANT logic on the Called Numbers, click the
Automatic Number Translation (ANT) for
Called Number
check box. Default: Disabled.
•
In the
Use Automatic Number Translation Table
, select the ANT Table number you have configured
for the Called Numbers. Default: Table 1.
If you have not configured the Automatic Number Translation Table,