Matrix SETU VFXTH System Manual Download

Page: 212 / 322

207

Matrix SETU

VFXTH

System Manual

•

On the FXS Port page, click the

Supplementary Services

link to expand.

•

Choose a Call Forward option,

Call Forward-Unconditional

Call Forward-Busy

Call Forward-No

Reply

, and select the respective check box to set. Default: Disabled.

•

For the Call Forward option you selected, in the corresponding

Number

field that appears, enter the

desired destination number (up to 40 characters) you want the calls to be forwarded to.

•

If you selected

Call Forward- No Reply

, you may also change the duration of the no-reply

Ring Timer

, if

required.

The range of the Call Forward No-Reply Timer is 01 to 99 seconds. Default: 15 seconds.

•

Click

Submit

to save.

To cancel any of the Call Forward options, clear the check boxes.

•

Click

Submit

to save.

•

Log out of Jeeves.

To set or cancel Call Forward from the Phone,

•

Lift handset of your phone.

Call Forward - Unconditional

•

Dial

131-1

to set.

•

Dial

#131-0

to cancel.

•

Dial

#135-Destination Number-End-of-Dialing

to configure destination number.

Where,
Destination number can be of maximum 24 digits.
End of Dialing may be # or * as configured in the system.

Call Forward - Busy

Summary of Contents for SETU VFXTH



































































































































































































































































































































Search results

Summary of Contents for SETU VFXTH

Reviews:

Related manuals for SETU VFXTH

Brands by name

Popular brands

Matrix SETU VFXTH, System Manual

Search results

Summary of Contents for SETU VFXTH

Reviews:

Related manuals for SETU VFXTH

Brands by name

Popular brands