Matrix E5x-02, Service Manual

Page: 59 / 74

55
8.21 tESting tHE Elliptical trainEr
oncE tHE Unit or rEplacEMEnt part iS fUlly inStallEd and aSSEMblEd and
propErly placEd on tHE floor, USE tHE following inStrUctionS to SEtUp
and tESt tHE MacHinE:
1) Check that the console is set for elliptical (EP).
a. Press and hold both LEVEL keys until Manager Mode appears on the display.
b. Press the UP or DOWN LEVEL keys until Engineering Mode appears on the display.
c. Use the UP or DOWN LEVEL keys to scroll to Machine Type.
d. Press ENTER on Machine Type and make sure it is set for EP (Elliptical).
e. If Machine Type is not set for EP, change to EP using the UP or DOWN LEVEL key and press ENTER to save.
f. Press and hold the STOP key for 3-5 seconds to return to normal function.
1) Without hitting start or entering any exercise modes, stand on the machine and hold the handlebars while initiating movement to simulate
exercising. While moving listen for any odd noises or squeaks.
2) After stopping movement, press the green GO key and begin using the machine.
3) Grasp the hand grips to check for proper heart rate response.
4) Press the LEVEL UP and DOWN keys both on the hand grips and on the console to make sure resistance is fully functional.
5) If everything functions properly, stop pedaling and the unit will reset to normal operation after 30 seconds.
cHaptEr 8: part rEplacEMEnt gUidE