Matrix E5x-02, Service Manual

Page: 50 / 74

46
1) Remove the crank arm plastic cap at the front disk (Figure A).
2) Disconnect the crank arm from the crank assembly (Figure B).
3) Remove the 3 bolts that hold on the mounting plate at the crank arm / pedal arm joint (Figure C). Note the plastic washer that mounts at the end
of the shaft (Figure D).
8.18 crank arM rEplacEMEnt
figUrE a figUrE b
figUrE c figUrE d
cHaptEr 8: part rEplacEMEnt gUidE