Matrix E5x-02, Service Manual

Page: 56 / 74

52
8.20 rollEr track rEplacEMEnt
1) Remove the 3 bolts that hold on the mounting plate at the crank arm / pedal arm joint (Figure A). Note the plastic washer that mounts at the
end of the shaft (Figure B).
2) Slide the pedal arm shaft out of the crank arm housing (Figure C) noting the order of the washers on the pedal arm shaft (Figure D).
figUrE a figUrE b
figUrE c figUrE d
cHaptEr 8: part rEplacEMEnt gUidE