3.40 SysType Command
Protocol Version: 2.3
Query the system series type, which is currently defined as one of the following values:
Value Series name
0
Carina
1
Lupus
2
Lynx
3
Hydra
NOTE:
This command was not added until version 2.3 of the Mascot protocol. On previous versions, this
command is available on the MSC-GCP2U32 LCD panel but not other Matrix Switch Corporation systems.
When determining the system type, if executing the command returns an Invalid Command error, the system
series can be assumed to be Carina.
Command
Description
SysType
Query the system hardware series.
Examples
>SysType
E01: Invalid command
>SysType
2
>
The first example command shows the response that would be received on a Carina series system with older
firmware not supporting the SysType command, the second example is what might be returned by an
MSC-GCP2U32 LCD panel.
3.41 W Command
Routers and MSC-GCP2U32 only
Write current matrix routing state to a preset. Recalling the preset later will restore the routing matrix to the
same state. This command modifies preset data which persists through power cycles.
Command
Description
W PRESET
Write current matrix routing state to PRESET.
Page 44 of 56
©
2013 Matrix Switch Corporation
www.matrix-switch.tv
