Re (2.1)
[0 | 1]
Disable HD reclockers (not all HD router
systems are supported).
Remo (2.1)
[0 | 1]
Query or assign remote router syncing.
Useful for creating a 3D system out of 2
routers.
SrcNames *
[SRC][LEVEL]
[LABEL]
Query or assign source names.
SysName
[STR]
Query or assign system name.
WebPass
(STR)
Assign web password.
* Router systems and MSC-GCP2U32 LCD panel only.
+ Router systems only.
3.10 B Command
The B command is used for rebooting the system into Bootloader for software updates. See the Software
Update section for details.
3.11 C Command
Routers and MSC-GCP2U32 only
NOTE:
Superseded by the
MtxCfg Command
.
The C command queries the matrix size. The response is in the format “Dests,Srcs,Levels,Flags1,Flags2”.
Where “Dests” is the count of system destinations, “Srcs” is the count of sources and “Levels” is the number of
system levels. The Flags1 and Flags2 fields are currently unused and will be 0.
Example for a 16x16 system with 2 levels
>C
16,16,2,0,0
>
3.12 DestNames Command
Routers and MSC-GCP2U32 only
Query or assign destination names. This command has 4 variations, described by the following table.
Destination names are saved and recalled on power up.
Command
Description
DestNames
Query all destination names.
DestNames DEST
Query destination names for all levels of a given destination.
DestNames DEST, LEVEL
Query the name of a specific destination and level.
Page 28 of 56
©
2013 Matrix Switch Corporation
www.matrix-switch.tv
