limited to 8 characters including spaces. Multi-level routers will have columns for Video and Audio Sources
and Destinations. Single level routers will have a column for Source labels and one for Destination labels. On
multi-level routers, secondary levels can be left blank to use the same label as the first level. Presets can also be
assigned label names. Click the
Save
button to save changes that have been made.
2.5 Config Tab
Figure 4 depicts the Config Tab as seen on a Router system beginning with Carina Series Firmware 5.3.0.
Configuration fields vary depending on router features, firmware version and if the device is a Remote Panel.
NOTE:
After changing any configuration settings click the
Save
button. All
Network Settings
changes require
a Reboot of the device in order to take effect. After clicking
Save
, click the
Reboot
button to restart the device.
Remember to enter a new IP address into your Web browser's Location bar, if the device's IP address has
changed.
Page 18 of 56
©
2013 Matrix Switch Corporation
www.matrix-switch.tv
Figure 4: Config Tab
