3.27 PairIO Command
Routers only - Protocol Version: 2.1
I/O pairing is used for pairing destinations/sources for 3D support. When activated a router will appear to have
half the number of physical destinations and sources. A given matrix crosspoint change will cause 2
destinations to be changed. Each odd destination/source is paired with the next highest even number
destination/source. This option is stored and recalled on power on. When enabling this feature on a 4x4 video
router for example, it would appear as a 2x2 3D router where destination 1 & 2 are paired and 3 & 4 are paired,
likewise for sources. This setting is stored and recalled on power up.
Command
Description
PairIO
Query current value of I/O pairing configuration.
PairIO 0 | 1
Enable or disable I/O pairing (0: disable, 1: enable)
Example
>PairIO
0
>PairIO 1
>
The first command queries the current state of I/O pairing, the second enables it.
3.28 PanelOfs Command
Carina series only - Protocol Version: 2.1
Define destination/source regions or assign media levels which a remote panel controls. This is typically used
to configure multiple remote panels to control portions of a video/audio router. For example, two 8x8 remote
panels could be used to control separate halves of an 8x16 router, the first would control the default destination
1-8 and the second would be configured using this command to control destination 9-16 (a destination offset of
9). Another useful configuration would be to configure one remote panel to control video only and another to
control audio only of a video/audio router by assigning primary level values of 1 and 2 respectively using this
command. This setting is stored and recalled on power up.
Command
Description
PanelOfs
Query current panel offset settings, 4 values are returned
separated by commas, corresponding to the same values which
are assigned.
PanelOfs DESTOFS, SRCOFS, LVL1, LVL2
Assign panel destination/source offsets and level control
values.
Page 37 of 56
©
2013 Matrix Switch Corporation
www.matrix-switch.tv
