User’s Manual
46
Full Screen
PIP
2x2
1+5
1+7
3x3
4x4
Previous Group
Next Group
OSD
Figure 62 — Mouse Display menu.
Full Screen
Selecting
(Full Screen) in the Mouse Display menu and choosing the camera number button displays the selected
camera full screen. It is the same as pressing the individual camera buttons on the front panel or clicking the left mouse
button on a camera image when in one of the multiview formats (i.e., 2x2, 1+5, 1+7, 3x3 or 4x4). Clicking the left mouse
button on the screen again returns to the previous display mode.
PIP, 2x2, 1+5, 1+7, 3x3, 4x4
Selecting
,
,
,
,
or
(PIP, 2x2, 1+5, 1+7, 3x3 or 4x4) in the Mouse Display menu displays
the cameras
in the selected multiview screen mode (PIP, 2x2, 1+5, 1+7, 3x3 or 4x4). Selecting each display mode is the same as
pressing the
DISPLAY
button or scrolling the mouse wheel up and down when in one of the multiview formats (i.e.,
2x2, 1+5, 1+7, 3x3 or 4x4).
NOTE: The PIP, 1+5, and 1+7 display modes will not be supported in the search mode.
In the 1+5 or 1+7 display mode, the main channel indicates the channel of the big screen which is displayed
in the top-left and you can select the camera you want to display on the main channel screen. Select a
channel on the screen and click the right mouse button to display the Camera Menu. Selecting Go To
Main swaps the selected channel with the main channel. This function is supported only in the 1+5 or
1+7 display mode and in the other channels except the main channel.
You can change the location of the PIP (Picture-in-Picture) counterclockwise or clockwise by pressing
the
Up
and
Down
arrow buttons and change its size by pressing the
Left
and
Right
arrow buttons. To
change its location and size by using the mouse, select the PIP and then click the right mouse button to
display the following menu. Select the options you want.
You can also change the location of the PIP
by clicking the left mouse button on the PIP window and dragging it to where you want it located, and
change the size of the PIP by clicking the left mouse button at the corner of the PIP window and dragging
it until it is the desired size.
Previous Group, Next Group
Selecting
or
(Previous Group or Next Group) in the Mouse Display menu moves to the previous or next page.
It is the same as pressing the
GROUP
button.
OSD
Selecting
(OSD) in the Mouse Display menu toggles OSD On and Off.
