User’s Manual
20
LAN Setup
Select between
Auto Configuration
and
Manual Configuration
for network configuration, and then select the
Test
button to
test the network configuration you selected.
NOTE: Selecting Auto Configuration allows the DVR to
automatically obtain LAN parameters (IP address,
Gateway, Subnet Mask and DNS Server address).
Selecting Manual Configuration allows you to set
up LAN parameters manually.
NOTE:
The network configuration you set should be tested
by selecting Test, otherwise the Next button will
cannot be selected, and you cannot move to the
next step.
Use DSL/PPPoE Setup:
Selecting the box allows you to set up the DSL network. Entering the ID and password
for DSL connection is required.
DVRNS Setup
Use DVR Name Service:
Select the box to use the DVR
Name Service.
DVRNS Server:
Enter the IP address or domain name of
the DVRNS server.
Port:
Set the port number of the DVRNS server.
Use NAT:
Select the box to use the NAT (Network Address
Translation) device.
DVR Name:
Enter the DVR name to be registered on the
DVRNS server.
Check:
Select the box to check whether or not the name
you entered can be used.
NOTE: The DVR name you entered should be checked by selecting Check, otherwise the DVRNS changes will
not be saved.
When entering no name or a name already registered on the DVRNS server, an error message displays.
Select the
Finish
button to finish the Setup Wizard.
Shutdown
Highlight
Shutdown
in the System menu and press the
button. The
Shutdown
screen displays asking you to confirm
whether or not you want to shut the system down.
After selecting
Shutdown
and pressing the
button, a screen will appear telling
you when it is safe to disconnect power.
Figure 19 — Shutdown screen.
