Digital Video Recorder
17
Highlighting the
Authority
box and pressing the
button will toggle between
all authority levels being turned On and Off. Highlighting the individual authority
level boxes and pressing the
button will toggle between that authority level
being turned On and Off. The authority levels that can be turned On and Off are:
Shutdown
–
The user can shut the system down on a local system.
Upgrade
–
The user can upgrade the software on a local system or a PC running RAS.
Color Control –
The user can control brightness, contrast, hue and saturation for
cameras on a local system or a PC running RAS.
Search
–
The user can access the Search mode on a local system or a PC running RAS.
Clip-Copy
–
The user can copy video clips on a local system or a PC running RAS.
Setup
–
The user without Setup authority cannot establish any system settings excluding
system shutdown and logout on a local system or a PC running RAS
System Time Change –
The user can change the system date and time on a local system or a PC running RAS.
Data Clear –
The user can clear all video data or format disks on a local system or a PC running RAS.
PTZ Control –
The user can control the PTZ camera on a local system or a PC running RAS.
Alarm-Out Control –
The user can reset the DVR’s outputs including the internal buzzer during an alarm by pressing the
ALARM
button on a local system or alarm-out control button on a PC running RAS.
Covert Camera View –
The user can view video from cameras set as Covert while in the Live Monitoring or Search mode on
a local system or a PC running RAS.
System Check –
The user can view the remote system status or check the remote system status as a batch process on a PC running
RAS.
Record Setup –
The user can establish all Record settings on a local system or a PC running RAS.
To add a User, highlight the
+ User…
box and press the
button. A virtual
keyboard appears allowing you to enter the User Name. Enter the name and assign
the User to a Group and password. You can use camera buttons 1 to 9 on the front
panel to assign the password. The password can be up to 8 digits. You will be asked
to confirm the password.
NOTE: In addition to using the front panel buttons or the infrared remote control, you can use the virtual
keyboard to assign the password. To display the virtual keyboard click the
button using the mouse.
Highlighting the box beside
Auto Login
allows you to select a User to be automatically logged in when the DVR is
powered up. It can also be set to never automatically login a user.
Highlighting the box beside
Auto Logout
allows you to select from a list of times that the user will be automatically
logged out. The options are: Never, 1 min., 3 min., 5 min., 10 min., 15 min., 20 min., 30 min. and 1 hr.
Wizard
Highlight
Wizard
and press the
button. The
Wizard
setup screen appears.
The Wizard setup guides you through
configuring the system for basic operation.
NOTE: This
Wizard screen can only be accessed when logged on as the admin user.
Figure 16 — Setup wizard screen.
Select either
Quick wizard
or
Network wizard
and select
the
Next
button to start the selected setup wizard.
NOTE: Selecting the Cancel button throughout the screens
exits the Quick Setup Wizard without saving your
changes and returns to the main setup screen.