Operating manual
pneuMATO-fill
MATO
GmbH & Co. KG
/ Benzstr. 16-24 / 63165 Mühlheim a. Main / Tel:+49(0)6108-906-0 / Fax:+49(0)6108-906-120
12
7
Tips for fault diagnostics:
Symptom
Mögliche Ursache
Behebung
Pump does not
produce any
grease.
The container is empty.
The grease supply has been
interrupted.
There is a lack of air pressure.
Faulty pump
Check the level of container.
Vent the pump.
Check supply line.
Replace pump.
The air motor of
the pump is
working too
slowly
The air filter of the pump is dirty
or clogged
Clean air filter
8
Specifications:
Pressurised air pump pneuMATO
pneuMATO-fill
Size of device
10-25 kg
50 kg
200 kg
1000 l
Pressure transfer
Max. delivery pressure at 8 bar compressed air
connection.
Flow rate per double stroke
Grease NLGI class 000
Grease NLGI class 2
Air pressure min./max.
Volume level:
1:3
24 bar
20 ccm
3500 ccm / min
1750 ccm / min
3 – 8 bar
ca. 85
dB(A)
Thread
Air connection
Grease outlet
Suction tube diameter
Rp ¼“
R ½“
40 mm
Suction tube length
525 mm
790 mm
940 mm
1490 mm
Weight
5.5 kg
5.6 kg
5.8 kg
5.9 kg
Lubricants:
Grease up to the consistency of 2 (NLGI / Class 2 according to DIN 51818) can be used. Pastes
without lubricative properties (with abrasive sandpaper parts) must not be handled with this device.
9
Disposal
After termination of use the device is to be disposed of in an environmentally
friendly manner in accordance with applicable statutory provisions.
Grease-tainted parts do not belong in the dustbin!
The applicable regulations for the registration, installation and operation of equipment for
handling of substances hazardous to water are to be strictly observed by the operator (such
as, e.g., Federal Water Act, German Ordinance on Exposure to Substances Hazardous to
Waters and Technical Rules and Regulations for Flammable Liquids).
Air Filter
