Maintenance
Page 18 of 27
6
Maintenance
Danger!
The implement can fall over.
Only perform service and maintenance tasks when
•
the CLS is on level ground,
•
the CS is mounted on the tractor and
•
the collection container is empty.
Danger!
Severe injury to the operator or third parties occurs.
Only perform service and maintenance tasks with lifted container, if the
container has been safeguarded against falling unintentionally by
appropriately positioning the lowering safeguard. Do not forget to unhook
the lowering safeguard before lowering the container
Attention!
Properly reattach all protective devices that have been dismounted after
executing the maintenance tasks.
Note!
•
After the first 20 hours of operation check all screw and bolt
connections.
•
Subject the CLS to regular service.
•
Only use lubricating grease, do not use oil to lubricate moving parts.
6.1
Service schedule (overview)
Time interval
Activity
After the first 20 operating
hours
•
Check all screw connections and bolt connections.
Tighten any loose screws, and secure any loose bolt
connections with spring cotter pins.
Daily or before each use
•
Check the safety elements and moving parts for wear.
Replace worn or defective parts, as needed
•
Check the hydraulic connections and lines for leaks.
Replace leaking connections and lines, as needed.
•
For the chassis version, check the air pressure of the casters
and adjust the air pressure if necessary.
After each use
•
clean the entire implement.
•
Particularly clean the container, and in the container clean
the perforated sheet, metal grille and the filter, the turbine,
the suction hose, and the suction port from the inside.
Summary of Contents for CLS-G/H 1050
Page 20: ...Maintenance Page 20 of 27 ...
Page 22: ...Maintenance Page 22 of 27 ...