Operation
Page 10 of 27
Proceed as follows to attach the material collection system on a rear three-point linkage:
1.
Turn the casters to the rear and secure them with the arrest bolts.
2. Drive the vehicle in reverse close to the material collection system.
3. Remove the linch pin on the lower link bolt
4. Remove the top link bolt
5. Adjust the height of the rear three-point linkage via the lower link bolts of the material
collection system.
6. Hook-in the lower link on the material collection implement and secure the lower link
with the linch pins
7. Hook-in the top link and secure the top link bolt with the linch pin.
8. With the aid of the top link, align the implement so that the shell is vertical.
9. Crank the support wheel upward and secure it with the bracket.
10. Connect the hydraulic connections of the material collection system to the
connections on the tractor.
Fig. 3: Align the implement
Arrest bolts
Fig. 1: Arrest bolts
Lower link bolt
Linch pin
Fig. 2: Lower link bolt
Securing bracket
Top link
Top link bolt
Summary of Contents for CLS-G/H 1050
Page 20: ...Maintenance Page 20 of 27 ...
Page 22: ...Maintenance Page 22 of 27 ...