Installation
Page 18
3.4.6
Mounting the rear hydraulic extension kit
12.
Align the holder on the frame, mark the bore positions and drill tapping bores for
M8. Cut the M8 thread and screw on the holder.
Fig 25: Hydraulic extension attached on the rear
4.
Lay out the hydraulic hoses to the connection of the control device and connect the
hoses in accordance with the connection assignment of your control device.
Control device, single: B / C
Control device, triple: G / D
5.
Fix the hose in place at a suitable point with cable ties.
3.4.7
Mounting the front hydraulic kit (only for joystick set triple, art. no.: 131_7136)
1.
Align the holder on the frame, mark the bore positions and drill tapping bores for
M8. Cut the M8 thread and screw on the holder
Fig 26: Hydraulic extension attached on the front
6.
Lay out the hydraulic hoses to the connections of the control device in accordance
with Fig 23 (B, C, K, L) and fix the hoses in place at a suitable point via cable ties.
