Operation / maintenance
Page 21
Fig 30: Lowering safeguard, shown in locked position
Note!
Strictly avoid lowering the front power lift via the tractor's control lever
when the lowering safeguard is locked.
This could damage parts of the front power lift!
5
Maintenance
5.1
General
Attention!
Personal injury or damage to the tractor and the implements can occur.
Before each use check all safety-relevant parts, the hydraulic connections,
and all threaded unions.
5.2
Service
Attention!
Danger of injury due to moving parts.
Remove the ignition key before performing maintenance tasks on the im-
plement.
After 25 operating hours, at the start of the season, or after a longer standstill period.
•
Grease the moving parts of the device
•
Grease the bearing of the bracket for the PTO shaft drive.
•
Grease the lowering safeguard:
•
Grease the arrest bolt
•
Check the seat, status and seal of the hydraulic hoses
Before and after each use check all threaded unions for firm seat and re-tighten them if
necessary
