Installation
Page 14
3.4
Mounting the joystick set
(Optionally available, article no. 131 7136 and 131 7160)
3.4.1
Mounting the joystick element
(For 131_7160 joystick set 3x)
10. Mount the joystick unit on the right fender as shown in Fig 18. After aligning it is
necessary to drill two 8.5 mm bores for this.
Fig 1: Joystick element
11. Now route the cable pulls through the existing opening shown in Fig 19 and down.
Fig 2: Cable pull passage
Cable pulls
