Installation
Page 12
Fig 13: Lift arm
3.3
Mounting an original JD hood guard
To mount a John Deere hood guard as shown in Fig 14 it is necessary the align the fas-
tening points on the front power lift. To do this we recommend the use of our conversion
kit for JD frontloaders (see Fig. 17, article no. 131 7224)
Fig 14: Hood guard
1.
Mark and drill two tapped bores as shown in the Fig below. The bore diameter is
13 mm.
Lift arm
Fastening screw with nut
Bolt with linch pin
