Installation
Page 8
3.1.2
Preparation
Before you mount the front power lift on the frame of the tractor it is necessary to drill 3
tapped holes on each side of the frame. The precise position of the individual bores is
shown in Fig 3.
Fig 3: Mounting bores in the tractor frame
The bore diameter for the A-marked bores is 16 mm, and the bore diameter for the B-
marked bore is 12 mm.
3.1.3
Mounting the front power lift
1.
Position the front power lift correctly relative to the tractor.
2.
Bolt the front power lift to the tractor frame on both sides with the 2 rear screws
(see Fig 4).
Fig 4: Fastening on the tractor frame
Threaded union
