background image

34 

                                                                                                                                                                                     

1812411-11  

 
Disclaimer 
 

All  information,  illustrations,  and  specifications  contained  in  this  user  manual  are  based  on  the  latest  information 
available at the time of printing. The right is reserved to make any changes at any time without obligation to notify any 
person or organization of such revisions or changes.  

Furthermore,  the  manufacturer,  or  its  sales  agents  are  not  liable  for  errors  contained  herein  or  for  incidental  or 
consequential damages (including lost profits) in connection with the furnishing, performance or use of this material. 

This user manual tells how to use and perform the required procedures during testing. Safe and effective use of this 
tester is very much dependent on the user following the normal practices and procedures outline in this manual. 

 
Warranty Information 
 

Limited Warranty 

This limited warranty covers defects in materials and workmanship for a period of two (2) years beginning the date 
the product is purchased by the end user and is subject to the following terms and conditions: 
 
1.  Within the warranty period, the manufacturer will repair or replace, at their option, any defective parts and return 

to the owner in good working condition.    

 

2.  Any repaired or replaced parts will be warranted for the balance of the original warranty or three months (3) 

months from the date of repair, whichever is longer. 

 

3.  This warranty only extends to the first owner and is not assignable or transferable to any subsequent owner. 

 

4.  Cost of delivery charges incurred for the repair of the product to and from the manufacturer will be borne by the 

owner.  

 

5.  This limited warranty covers only those defects that arise as a result of normal use and does not cover those 

that arise as a result of: 

 

Unauthorized modifications and repair. 

 

Improper operation or misuse. 

 

Accident or neglect such as dropping the unit onto hard surfaces. 

 

Contact with water, rain or extreme humidity. 

 

Contact with extreme heat. 

 

Cables that have broken, bent contact pins or subject to extreme stress or wear. 

 

Physical damage to the product surface including scratches, cracks or other damage to the display screen 
or other externally exposed parts. 
 

Limitations of Warranty 

 

Other than the foregoing limited warranty, the manufacturer does not make any other warranty or condition of 
any kind, whether expressed or implied. 

 

Any implied warranty of merchantability, or fitness for use shall be limited to the duration of the foregoing limited 
warranty. 

 

Otherwise, the foregoing 

limited warranty is the owner’s sole and exclusive remedy and is in lieu of all other 

warranties whether expressed or implied. 

 

The manufacturer or any  of its exclusive sales agents  shall  not be  liable for any  consequential or  incidental 
damages or losses arising from the use of this product. 

 

All warranty information, product features and specifications are subjected to change without prior notice. 

Summary of Contents for MBT2415



































Reviews: