13
1812411-11
19. For motorcycle batteries,
before selecting whether [WET (SLI)] or [AGM] and the ratings ‘CCA, SAE, EN, IEC,
DIN, CA and JIS #’ from the menu, check the battery model. This can be checked on the battery label as some
of the examples show below:
With the battery model in hand, refer to the battery rating chart (as seen in this example Fig.32 below) provided
in separate copies with the tester when purchased, to get values to be keyed in.
Once the battery type [SLI (WET)] or [AGM] has been selected, it will proceed to the display as shown below
(Fig.33):
20.
Press key and the display will show as in (Fig.34). To enter the value, press
or
key to increase or
decrease the original value shown on the display by 100 units.
Likewise use
or
key to increase or decrease the last two digits step of 5 units for each pressing.
21. Once the Amps rating of the battery is confirmed, press key to start the testing process. Refer to the display
below (Fig.35):
Fig.33
Fig.32
Fig.35
8
Fig.34
180
CCA